The patented DL electromechanical positioning device with 4 driving rollers rotates on itself from 0 degrees to 360 degrees.

The vehicle on the positioner can be fixed in various ways on the bodywork or on the wheel discs.

Given its characteristics, in addition to the bodywork, it can also be used in other sectors: metalworking, painting, carpentry, sandblasting, etc.

An innovative system. The DL40L positioning device was created to satisfy the washing needs with a high pressure pump or with a water / sand pump.

To mount the DL40 positioner, simply lift the machine 70 cm from the ground using two simple jacks. Start from the front by removing the wheels and fixing the first ring of the DL 40 positioner to the hub without wheel, then move to the rear by lifting the machine with the two jacks and removing the wheels, the second ring is fixed to the rear hub. Or you can use a scissor bridge or a two free column bridge.

The positioner rotates from 0 ° to 360 ° in all directions, you can stop the positioner in the most comfortable position for your work.

The car complete with liquids can be rotated up to 85 ° in all directions.

Any piece anchored inside the positioner can be rotated as desired while working.

Any piece anchored inside the positioner can be rotated as desired while working. In particular, the DL40S positioner has been designed for sandblasting work. During the sandblasting process it becomes easy to rotate the piece inserted inside the positioner in order to work with a clearly superior finish and a lot faster.

Any piece anchored inside the positioner can be rotated as desired while working. In particular, the DL40S positioner adapts perfectly to the painting room making the work faster and with a finish that would not be possible without a positioner, because by rotating the piece being painted, it is possible to cure every small imperfection.